This setting lets you enable Checklist questionaire/s on the fleet controller upon operator sign on. If access control is disabled, Checklist prompts straight away from ignition on.

1. From the menu on the ribbon bar, click ADMINISTRATION and then Checklist.
2. Locate the category to edit and click .
3. Tick the checkbox on "Enable Checkllist" to enable. Tick off to disable checklist - remaining ticks on other checkboxes will be unticked and dimmed, proceed to step 7.
4. Tick the checkbox on  "CRITICAL OUTPUT on critical question", if required to have the critical output triggered when a critical question is answered incorrectly. This acknowledges that you have read and understood RCT's safety notice in Critical Output Configuration.
5. Tick the checkbox on  "OUT OF SERVICE on critical question" to render the machine out of service with a red tag when a critical question is answered incorrectly. Only supervisor and technician can access the machine afterward.
6. Tick the checkbox on  "Allow checklist to be declined" to allow the questionaire be bypassed during checklist and gain straight access to machine. A decline button  will be added on the fleet controller's display.
7. Click .

Questionaires can be setup and manage in CHECKLIST - Question Management menu from the ribbon bar.