Author: Redentor Sandiego
Email alerts
Disable the commissioning code
Adding an operator
Machine management
Checklist setup
Administration and site setup
User listing
Help section
Logging in for the first time
Machine Shift Utilisation
This report allows users to drill down into machine data based on shifts and periods, presenting the results in pie charts and an exportable summary report. Shift Utilisation reports can be customised based on the following criteria: Machine selection select one or all Shift selection select one or...
Enable critical output on critical impact
This guide is to set up the ability to turn on the critical output relay when a critical impact occurs Applying critical output settings and Excess idle settings to machines categories Note 1: if Critical Output Configuration cannot be seen please contact your local support branch. Note 2: If the...
Pedestrian Alert
This feature alerts operators to pedestrians seen by the optional Pedestrian Alert camera system. Contact SmarTrack Sales for more information.
RFID Card Reader Simulator Software
Download link: Card Reader Sim 1.0
Operator Utilisation
This page creates a graph showing idle versus traction of all operators with activity over the reporting period. Utilisation includes all the activities on fleet operated by an operator.
Machine Diagnostics
This page shows the communication status of all fleets on the site.
Machine Utilisation
This page creates a graph showing idle versus traction of all fleets with activity over the reporting period.
Machine Activity Timeline
Machine Activity Report
This report shows the utilisation of fleet over the reporting period. Calculation was based on the work time vs idle time. Utilisation percentage indicates how utilised the machine is when it is in use.
Access Control Configuration
This setting lets you enable/disable an operator to sign in on the fleet controller. If access control is disabled, operator via ignition on has straight access to machine without the use of PIN code or access CARD. A default "OPERATOR" name will be signed on and used in all reports for any events...
Checklist Configuration
This setting lets you enable Checklist questionaire/s on the fleet controller upon operator sign on. If access control is disabled, Checklist prompts straight away from ignition on. From the menu on the ribbon bar, click ADMINISTRATION and then Checklist. Locate the category to edit and click . Tick...
Critical Output Configuration
This setting lets you enable the critical output of the fleet controller when a critical event happens. These events are: An unexpected answer on critical question during checklist. Excessive idling, vehicle is not moving for a set period and no one is on the seat. Critical impact or collision of...
Excess Idle Configuration
This determines how the excess idling can be detected on the fleet controller and behaviour settings. From the menu on the ribbon bar, click ADMINISTRATION and then Excess Idle. Locate the category to edit and click . Select on the dropdown list of Excess Idle Detection "No Traction" to enable. Select...
Impact Configuration
This enables the Impact Detection of the fleet controller. You can set Low, Medium and Critical values for each trigger point. Impact value rules: Low < Medium < Critical From the menu on the ribbon bar, click ADMINISTRATION and then Impact. Locate the category to edit and click . Tick the...
License Configuration
When enabled, the License and/or Permit expiry message feature will become active on the fleet controller. Expiry warning message can be enabled by following the below steps. From the menu on the ribbon bar, click ADMINISTRATION and then License Expiry. Locate the category to edit and click . Tick...